Ηχοσυστήματα, DYNACORD CL 1600 Power Amplifier 1500 Watts - DYNACORD DYNACORD

The new Compact Linear Precision Series power amplifiers combine outstanding audio performance with maximum reliability and operating security as well as being markedly lighter than equivalent power amplifiers. The inputs are electronically balanced and implemented on XLR connectors, whilst Direct Outs for looping the signal are also standard. Input routing permits the choice between Mono and Stereo modes. Mono bridged mode is also easy to realize thanks to the separate Bridged Out connectors and the Bridged Mode switch.

Load Impedance 2 O, 4 O, 8 O Max. Midband, Output Power, THD = 1%, 1kHz , Dual Channel 2 O - 1100W, 4 O - 800W, 8 O - 500W Rated Output Power, THD < 0,1%, 20Hz ? 20kHz 4 O - 700W, 8 O - 350W Max. Single Channel, Output Power, Dynamic Headroom, IHF-A 2 O - 2200W, 4 O - 1200W, 8 O - 620W Max. Single Channel, Output Power, Continuous, 1kHz 2 O - 1500W, 4 O - 950W, 8 O - 550W Max. Bridged, Output Power, THD = 1%, 1kHz 4 O - 2200W, 8 O - 1600W Maximum RMS Voltage Swing, THD = 1%, 1kHz 72V Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms 10Hz ? 60kHz Voltage Gain, ref. 1kHz 32,0 dB Input Sensitivity, at rated output power +4,7 dBu (1,33 V rms) THD at rated output power, MBW = 80kHz, 1kHz < 0,05% IMD-SMPTE, 60Hz, 7kHz < 0,02% DIM 30, 3,15kHz, 15kHz < 0,01% Maximum Input Level +22 dBu (9,76 V rms) Crosstalk, ref. 1kHz, at rated output power < -80 dB Frequency Response, ref. 1kHz (- 1dB) 15Hz ? 40kHz Input Impedance, active balanced 20 kO Damping Factor, 1kHz > 300 Slew Rate 35 V/?s Signal to Noise Ratio, Amplifier, A-weighted 107,0 dB Output Noise, A-weighted < -70 dB Output Stage Topology Class H Power Requirements 100V, 120V, 220V, 230V, 240 V; 50Hz ? 60Hz (factory configured) Power Consumption 1/8 max. 660W (Measured with 110% of reated mains voltage) Protections Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling Front-to rear, 3-stage fans Ambient Temperature Limits +5°C ... +40°C (40°F ... 105°F) Safety Class I Dimensions (W x H x D) mm 483 x 88,1 x 386,8 Weight 16 kg (35,2 lbs) Optional Rear-rackmount 15,5? D112930 (NRS 90262), Rear-rackmount 18? D112933 (NRS 90264), LPN + Lo-Cut internal filter-card D112963 (NRS 90268).